GIGA-BYTE TECHNOLOGY R181-2A0, Service Manual

Page: 93 / 123

- 92 - BIOS Setup
(Note 1) Only appears when HDD sets to RAID Mode.
(Note 2) Only supported when HDD is in AHCI or RAID Mode.
RAID Mode: When set to RAID, the SATA controller enables both its RAID and AHCI functions. You will
be allows access the RAID setup utility at boot time.
Options available: AHCI/RAID. Default setting is AHCI .
Alternate Device ID on RAID
(Note 1)
Enable/Disable Alternate Device ID on RAID mode.
Options available: Enable/Disable. Default setting is Disabled
Please note that this option appears when HDD is in RAID Mode.
sSATA Port 0/1/2/3/4/5
The category identifies sSATA hard drives that are installed in the computer.
System will automatically detect HDD type.
Port 0/1/2/3/4/5
Enable/Disable Port 0/1/2/3/4/5 device.
Options available: Enable/Disable. Default setting is Enable .
Hot Plug (for Port 0/1/2/3/4/5)
(Note 2)
Enable/Disable HDD Hot-Plug function.
Options available: Enable/Disable. Default setting is Disable .
Spin Up Device (for Port 0/1/2/3/4/5)
(Note 2)
On an edge detect from 0 to 1, the PCH starts a COM reset initialization to the device.
Options available: Enable/Disable. Default setting is Disabled