GIGA-BYTE TECHNOLOGY R181-2A0 Service Manual Download Page 75

Page: 75 / 123

- 74 -

BIOS Setup

5-3-4

Memory Configuration

Integrated Memory Controller (iMC)
Enforce POR

When set to Enable, the system enforces Plan Of Record restrictions for DDR4 frequency and voltage
programming. When set to Auto, the system sets it to the MRC default settings.

Options available: Auto/POR/Disable. Default setting is

Enable

Memory Frequency

Configures the memory frequency.

Options available: Auto/2133/2400/2666. Default setting is

Auto

Enable ADR

Enables the detecting and enabling of ADR.

Options available: Enable/Disable. Default setting is

Enable

Legacy ADR Mode

Enable/Disable the Legacy ADR Mode.

Options available: Enable/Disable. Default setting is

Disable

ADR Data Save Mode

Data Save Mode for ADR, Batterybacked or Type 01 NVDIMM.

Options available: Disable/Batterybacked DIMMs/NVDIMMs. Default setting is

NVDIMMs

Erase-ARM NVDIMMs

Enable/Disable Erasing and Arming NVDIMMs.

Options available: Enable/Disable. Default setting is

Enable

Restore NVDIMMs

Enable/Disable Automatic restoring of NVDIMMs.

Options available: Enable/Disable. Default setting is

Enable

Summary of Contents for R181-2A0




























































































































Search results

Summary of Contents for R181-2A0

Reviews:

Related manuals for R181-2A0

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY R181-2A0, Service Manual

Search results

Summary of Contents for R181-2A0

Reviews:

Related manuals for R181-2A0

Brands by name

Popular brands