GIGA-BYTE TECHNOLOGY R181-2A0 Service Manual Download Page 110

Page: 110 / 123

BIOS Setup

- 109 -

5-6 Boot Menu

The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error

message if the legacy drive(s) specified is not bootable.

Boot Configuration

Setup Prompt Timeout

Number of seconds to wait for setup activation key. 65535 (0xFFFF) means indefinite waiting.

Press the numeric keys to input the desired values.

Bootup NumLock State

Enable/Disable the Bootup NumLock function.

Options available: On/Off. Default setting is

Quiet Boot

Enable/Disable showing the logo during POST.

Options available: Enabled/Disabled. Default setting is

Enabled

Boot mode select

Selects the boot mode.

Options available: LEGACY/UEFI. Default setting is

UEFI

FIXED BOOT ORDER Priorities
Boot Option #1/#2/#3/#4/#5

Press [Enter] to configure the boot priority.

By default, the server searches for boot devices in the following secquence:

1.  Hard drive.
2.  CD-COM/DVD drive.
3.  USB device.
4.  Network.
5.  UEFI.

Summary of Contents for R181-2A0




























































































































Search results

Summary of Contents for R181-2A0

Reviews:

Related manuals for R181-2A0

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY R181-2A0, Service Manual

Search results

Summary of Contents for R181-2A0

Reviews:

Related manuals for R181-2A0

Brands by name

Popular brands