GIGA-BYTE TECHNOLOGY GA-Z270-HD3P, User Manual

Page: 34 / 44

&
PCH LAN Controller
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled .
&
Wake on LAN Enable
Enables or disables the wake on LAN function. (Default: Enabled)
&
High Precision Timer
Enables or disables High Precision Event Timer (HPET) in the operating system. (Default: Enabled)
&
IOAPIC 24-119 Entries
Enables or disables this function. (Default: Enabled)
&
Platform Power Management
Enables or disables the Active State Power Management function (ASPM). (Default: Disabled)
&
PEG ASPM
Allows you to configure the ASPM mode for the device connected to the CPU PEG bus. This item is
configurable only when Platform Power Management is set to Enabled . (Default: Enabled)
&
PCH ASPM
Allows you to configure the ASPM mode for the device connected to Chipset's PCI Express bus. This item
is configurable only when Platform Power Management is set to Enabled . (Default: Enabled)
&
DMI ASPM
Allows you to configure the ASPM mode for both CPU side and Chipset side of the DMI link. This item is
configurable only when Platform Power Management is set to Enabled . (Default: Enabled)
&
AC BACK
Determines the state of the system after the return of power from an AC power loss.
Always Off The system stays off upon the return of the AC power. (Default)
Always On The system is turned on upon the return of the AC power.
Memory The system returns to its last known awake state upon the return of the AC power.
2-7 Power
- 34 -