GIGA-BYTE TECHNOLOGY GA-Z270-HD3P User Manual Download Page 13

Page: 13 / 44

1/2) ATX_12V_2X4/ATX (2x4 12V Power Connector and 2x12 Main Power Connector)

With the use of the power connector, the power supply can supply enough stable power to all the components

on the motherboard. Before connecting the power connector, first make sure the power supply is turned

off and all devices are properly installed. The power connector possesses a foolproof design. Connect the

power supply cable to the power connector in the correct orientation.

The 12V power connector mainly supplies power to the CPU. If the 12V power connector is not connected,

the computer will not start.

3/4) CPU_FAN/SYS_FAN1/SYS_FAN2/SYS_FAN3 (Fan Headers)

All fan headers on this motherboard are 4-pin. Most fan headers possess a foolproof insertion design.

When connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire

is the ground wire). The motherboard supports CPU fan speed control, which requires the use of a CPU

fan with fan speed control design. For optimum heat dissipation, it is recommended that a system fan be

installed inside the chassis.

To meet expansion requirements, it is recommended that a power supply that can withstand high power consumption

be used (500W or greater). If a power supply is used that does not provide the required power, the result can

lead to an unstable or unbootable system.

ATX_12V_2X4:

Pin No.

Definition

Pin No.

Definition

GND (Only for 2x4-pin 12V)

+12V (Only for 2x4-pin 12V)

GND (Only for 2x4-pin 12V)

+12V (Only for 2x4-pin 12V)

GND

+12V

GND

+12V

DEBUG

PORT

G.QBOFM

ATX

ATX:

Pin No.

Definition

Pin No.

Definition

3.3V

-12V

GND

+5V

PS_ON (soft On/Off)

GND

+5V

GND

Power Good

5VSB (stand by +5V)

+5V

+12V

+5V

+12V (Only for 2x12-pin

ATX)

+5V (Only for 2x12-pin ATX)

3.3V (Only for 2x12-pin

ATX)

GND (Only for 2x12-pin ATX)

•

Be sure to connect fan cables to the fan headers to prevent your CPU and system from overheating. Overheating

may result in damage to the CPU or the system may hang.

•

These fan headers are not configuration jumper blocks. Do not place a jumper cap on the headers.

DEBUG

PORT

G.QBOFM

ATX_12V_2X4

CPU_FAN

DEBUG

PORT

G.QBOFM

SYS_FAN3

DEBUG

PORT

G.QBOFM

SYS_FAN1/2

DEBUG

PORT

G.QBOFM

Pin No.

Definition

GND

Voltage Speed Control

Sense

PWM Speed Control

- 13 -

Summary of Contents for GA-Z270-HD3P













































Search results

Summary of Contents for GA-Z270-HD3P

Reviews:

Related manuals for GA-Z270-HD3P

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY GA-Z270-HD3P, User Manual

Search results

Summary of Contents for GA-Z270-HD3P

Reviews:

Related manuals for GA-Z270-HD3P

Brands by name

Popular brands