manualshive.com logo in svg

GIGA-BYTE TECHNOLOGY GA-MA78GM-US2H, User Manual

The GIGA-BYTE TECHNOLOGY GA-MA78GM-US2H is a high-performance motherboard that ensures smooth and efficient computing. To learn more about its features and functionalities, make sure to check out the comprehensive User Manual available for free download at manualshive.com. Get the most out of your motherboard with this informative manual.

Share
Download
background image

GA-MA78GM-US2H Motherboard

- 12 -

Unique Features

Support for @BIOS

Support for Q-Flash

Support for Virtual Dual BIOS

Support for Download Center

Support for Xpress Install

Support for Xpress Recovery2

Support for EasyTune

 (Note 6)

Support for Easy Energy Saver

 (Note 7)

Support for Time Repair

Support for Q-Share

Bundled Software

Norton Internet Security (OEM version)

Operating System

Support for Microsoft

®

 Windows

®

 Vista/XP

Form Factor

Micro ATX Form Factor; 24.3cm x 24.3cm

(Note 1) Due to Windows Vista/XP 32-bit operating system limitation, when more than 4 GB of physical

memory is installed, the actual memory size displayed will be less than 4 GB.

(Note 2) Whether 1200 MHz memory speed is supported depends on the CPU being used.
(Note 3) The DVI-D port does not support D-Sub connection by adapter.
(Note 4) Simultaneous output for DVI-D and HDMI is not supported.
(Note 5) Whether the CPU/system fan speed control function is supported will depend on the CPU/

system cooler you install.

(Note 6) Available functions in EasyTune may differ by motherboard model.
(Note 7) Due to the hardware limitation, you must install an AMD AM2+ Phenom

TM

 series CPU to

enable support for Easy Energy Saver.

Summary of Contents for GA-MA78GM-US2H





































































































Reviews:

No comments

Related manuals for GA-MA78GM-US2H

MYiR MYC-C8MMQ6-8E2D-160-I Linux Development Manual preview
MYC-C8MMQ6-8E2D-160-I
Brand: MYiR Pages: 50
Supero P8SAA User Manual preview
P8SAA
Brand: Supero Pages: 90
Analog Devices ADUX1020 User Manual preview
ADUX1020
Brand: Analog Devices Pages: 9
ASROCK Z77E-ITX User Manual preview
Z77E-ITX
Brand: ASROCK Pages: 64
MSI A320M PRO-VH PLUS User Manual preview
A320M PRO-VH PLUS
Brand: MSI Pages: 154
Microchip Technology Power Debugger Manual preview
Power Debugger
Brand: Microchip Technology Pages: 89
Advantech ASMB-820-00A1E User Manual preview
ASMB-820-00A1E
Brand: Advantech Pages: 88
Liantec ITX-QM77 Quick Installation Manual preview
ITX-QM77
Brand: Liantec Pages: 4
ASROCK Z87 Extreme9/ac User Manual preview
Z87 Extreme9/ac
Brand: ASROCK Pages: 116
NXP Semiconductors SJA1105SMBEVM User Manual preview
SJA1105SMBEVM
Brand: NXP Semiconductors Pages: 35
NXP Semiconductors LFSTBEB7361 Quick Start Manual preview
LFSTBEB7361
Brand: NXP Semiconductors Pages: 2
MSI MS-7260 User Manual preview
MS-7260
Brand: MSI Pages: 115
BCM Advanced Research AR8MX Series Quick Start Manual preview
AR8MX Series
Brand: BCM Advanced Research Pages: 9
Watersnake FIERCE 2 54LB/48 Owner'S Manual preview
FIERCE 2 54LB/48
Brand: Watersnake Pages: 44
Watersnake Venom SXW 34/26 Owner'S Manual preview
Venom SXW 34/26
Brand: Watersnake Pages: 44
Watersnake ADVANCE SWS 70/36 Owner'S Manual preview
ADVANCE SWS 70/36
Brand: Watersnake Pages: 28
AZZA P4XE-ANB Manual preview
P4XE-ANB
Brand: AZZA Pages: 43
Acorp 6VIA90A Manual preview
6VIA90A
Brand: Acorp Pages: 26

Brands by name

Popular brands

Load more brands