manualshive.com logo in svg

GIGA-BYTE TECHNOLOGY GA-7PTSH, User Manual, Page: 63 / 83

Share
Download
GIGA-BYTE TECHNOLOGY GA-7PTSH User Manual Download Page 63

- 63 -

BIOS Setup

  Patrol Scrub

 

Enable/Disable Patrol Scrub function. 

 

Options available: Enabled/Disabled. Default setting is 

Enabled

.

  Demand Scrub

 

Enable/Disable Demand Scrub function.

 

Options available: Enabled/Disabled. Default setting is 

Disabled

.

  Data Scrambling

 

Enable/Disable Data Scrambling function. 

 

Options available: Enabled/Disabled. Default setting is 

Enabled

.

  Device Tagging

 

Enable/Disable Device Tagging function.

 

Options available: Enabled/Disabled. Default setting is 

Disabled

. 

  Rank Margin

 

Enable/Disable Rank Margin function.

 

Options available: Enabled/Disabled. Default setting is 

Disabled

. 

  Thermal Thortting

 

Configure theThermal Thortting. 

 

Options available: Disabled/OLTT/CLTT. Default setting is 

CLTT

. 

  OLTT Peak BW %

 

Press the numberic keys to increase or decrease the desired values.

 Altitude

 

Configure the Altitude value.

 

Options available: Auto/300 M/900 M/1500 M/3000 M. Default setting is 

3000 M

.

  Enforce DIMM

 

To enforce POR function. When disabled, the system will enforce 1600MHz LRDIMM. 

 

Options available: Enforce EN/Stretch EN/Enforce DIS. Default setting is 

Enforce DIS

.  

  DIMM Information

 

Press [Enter] for configuration to view installed DIMM information. 

Summary of Contents for GA-7PTSH




















































































Reviews:

No comments