GIGA-BYTE TECHNOLOGY GA-7PTSH, User Manual

Page: 22 / 83

Hardware Installation - 22 -
The front panel design may differ by chassis. A front panel module mainly consists of power switch,
power LED, and etc. When connecting your chassis front panel module to this header, make sure the
wire assignments and the pin assignments are matched correctly.
10) F_PANEL (Front Panel Header)
Connect the power switch, reset switch, speaker, chassis intrusion switch/sensor and system status
indicator on the chassis to this header according to the pin assignments below. Note the positive and
negative pins before connecting the cables.
Pin No. Definition
1 CTNR_PS_ON_N
2 I2C_FCB_SCL
3 PSU_PGD_PS
4 I2C_FCB_SDA
5 FCB_REQ_N
6 BMC_LED_PWR_GRN_R_N
7 BTN_FP_PER_N
8 BMC_SYS_HLTH_LED_R_N
9 ACK_N
10 BMC_UID_LED_N
11 GND
12 BMC_UID_BUTTON_TTL_N
12 11
2 1
2x9 pin
11) LAN_LED (LAN1 port and LAN2 port active LED Header)
Pin No. Definition
1 LED_NIC_LINK0_ACT_N
2 P3V3_AUX
3 LED_NIC_LINK1_ACT_N
3
1
2x9 pin