GIGA-BYTE TECHNOLOGY GA-7PTSH Page 19 User Manual Download

Page: 19 / 83

- 19 -

Hardware Installation

Pin No. Definition

GND

TXP

TXN

GND

RXN

RXP

GND

•

A RAID 0 or RAID 1 configuration requires at least two hard drives. If more than two hard drives

are configured, the total number of hard drives must be an even number.

•

A RAID 10 configuration requires four hard drives.

(Note) When a RAID configuration is built across the SATA 6Gb/s channels, the system performance of

the RAID configuration may vary depends on the devices are connected.

DEBUG

PORT

G.QBOFM

3) SATA0/SATA1 (SATA 6Gb/s Connectors)
SATA2/SATA3/SATA4/SATA5 (SATA 3Gb/s Connectors)

The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and

1.5Gb/s standard. Each SATA connector supports a single SATA device.

SATA0

SATA1

SATA4SATA2

SATA3

SATA5

4) RAID_KEY1 (RAID Selection Connector/Opional)

2x9 pin

Pin No. Definition

GND

SSB_SAS/SATA_RAID_KEY

GND

Summary of Contents for GA-7PTSH




















































































Search results

Summary of Contents for GA-7PTSH

Reviews:

Related manuals for GA-7PTSH

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY GA-7PTSH, User Manual

Search results

Summary of Contents for GA-7PTSH

Reviews:

Related manuals for GA-7PTSH

Brands by name

Popular brands