manualshive.com logo in svg

GIGA-BYTE TECHNOLOGY GA-6LXSG, User Manual, Page: 56 / 99

Share
Download
GIGA-BYTE TECHNOLOGY GA-6LXSG User Manual Download Page 56

BIOS Setup

- 56 -

2-2-7  USB Configuration

  Legacy USB Support  

 

Enables or disables support for legacy USB devices.  

 

Options available: Auto/Enabled/Disabled. Default setting is 

Enabled

.

   USB30. Support  

 

Enables/Disable USB3.0 (XHCI) controller support.  

 

Options available: Enabled/Disabled. Default setting is 

Enabled

.

  XHCI Hand-off  

 

Enable/Disable XHCI (USB 3.0) Hand-off support.   

 

Options available: Enabled/Disabled. Default setting is 

Enabled

.

  EHCI Hand-off  

 

Enable/Disable EHCI (USB 2.0) Hand-off function.   

 

Options available: Enabled/Disabled. Default setting is 

Disabled

.

  USB Mass Storage Driver Support

(Note)

   

 

Enable/Disable USB Mass Storage Driver Support.  

 

Options available: Enabled/Disabled. Default setting is 

Enabled

.

(Note)  This item is present only if you attach USB types of device.

Summary of Contents for GA-6LXSG




































































































Reviews:

No comments