GIGA-BYTE TECHNOLOGY GA-6LXSG, User Manual, Page: 35 / 99

- 35 - Hardware Installation
30/31) SATA_DOM0/SATA_DOM1 (SATA port 0 and port 1 DOM Jumpers)
SATA_DOM1
SATA_DOM0
1
1
CAUTION!
• If the SATA DOM power is supplied by the motherboard, set the jumper to pin 1-2.
• If the SATA DOM power is supplied by external power, set the jumper to pin 2-3.
• If a SATA type hard drive is connected to the motherboard, please ensure the jumper is closed
and set to 2-3 pins (Default setting), in order to reduce any risk of hard disk damage.
Please refer to the pin definition table in the following.
Pin No. Definition
1 P5V
2 SATA_DOM_0
3 GND
For SATA_DOM0
Pin No. Definition
1 P5V
2 SATA_DOM_1
3 GND
For SATA_DOM1