GIGA-BYTE TECHNOLOGY GA-6LXSG, User Manual, Page: 25 / 99

- 25 - Hardware Installation
7
7
1
1
7 7
1 1
DEBUG
PORT
G.QBOFM
DEBUG
PORT
G.QBOFM
DEBUG
PORT
G.QBOFM
DEBUG
PORT
G.QBOFM
9/10/11/12/13/14) SATA0/SATA1/SATA_2_3/SATA_4_5/SATA6/SATA7/SATA8/SATA9
(SATA
6Gb/s Connectors)
The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and
1.5Gb/s standard. Each SATA connector supports a single SATA device.
• A RAID 0 or RAID 1 configuration requires at least two hard drives. If more than two hard drives
are configured, the total number of hard drives must be an even number.
• A RAID 10 configuration requires four hard drives.
(Note) When a RAID configuration is built across the SATA 6Gb/s channels, the system performance of
the RAID configuration may vary depends on the devices are connected.
Pin No. Definition
1 GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 GND
When SATA_DOM0/1 jumper
are set to
2-3 pin:
Pin No. Definition
1 GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 P5V
When SATA_DOM0/1 jumper
are set to
1-2 pin :
SATA0
SATA9
SATA8
SATA7
SATA6
SATA1
SATA_2_3
SATA_4_5