GIGA-BYTE TECHNOLOGY G481-HA1 Service Manual Download Page 101

Page: 101 / 124

- 101 -

BIOS Setup

5-4 Server Management Menu

Parameter

Description

FRB-2 Timer

Enable/Disable FRB-2 timer (POST timer).
Options available: Enabled/Disabled. Default setting is

Disabled

FRB-2 Timer
timeout

Configure the FRB2 Timer timeout.

Options available: 3 minutes/4 minutes/5 minutes/6 minutes. Default setting is

minutes

Please note that this item is configurable when FRB-2 Timer is set to Enabled.

FRB-2 Timer Policy

Configure the FRB2 Timer policy.

Options available: Do Nothing/Reset/Power Down. Default setting is

Do Nothing

Please note that this item is configurable when FRB-2 Timer is set to Enabled.

OS Watchdog
Timer

Enable/Disable OS Watchdog Timer function.
Options available: Enabled/Disabled. Default setting is

Disabled

OS Wtd Timer
Timeout

Configure OS Watchdog Timer.

Options available: 5 minutes/10 minutes/15 minutes/20 minutes. Default setting is

minutes

Please note that this item is configurable when OS Watchdog Timer is set to

Enabled.

OS Wtd Timer
Policy

Configure OS Watchdog Timer Policy.

Options available: Reset/Do Nothing/Power Down. Default setting is

Reset

Please note that this item is configurable when OS Watchdog Timer is set to

Enabled.

Summary of Contents for G481-HA1





























































































































Search results

Summary of Contents for G481-HA1

Reviews:

Related manuals for G481-HA1

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY G481-HA1, Service Manual

Search results

Summary of Contents for G481-HA1

Reviews:

Related manuals for G481-HA1

Brands by name

Popular brands