GIGA-BYTE TECHNOLOGY G481-HA1 Service Manual Download Page 106

Page: 106 / 124

BIOS Setup

- 106 -

5-4-4

BMC Network Configuration

Parameter

Description

BMC network configuration

Select NCSI and Dedicated
LAN

Switch NCSI and dedicated LAN and send KCS command.
Options available: Do Nothing/Mode1 (Dedicated)/Mode2(NSCI)/Mode3
(Failover).
Default setting is

Mode1 (Dedicated)

Lan Channel 1

Configuration Address source

Select to configure LAN channel parameters statically or dynamically

(DHCP). Do nothing option will not modify any BMC network parameters
during BIOS phase.

Options available: Unspecified/Static/DynamicBmcDhcp. Default setting

DynamicBmcDhcp

Station IP address

Displays IP Address information.

Subnet mask

Displays Subnet Mask information.
Please note that the IP address must be in three digitals, for example,
192.168.000.001.

Router IP address

Displays the Router IP Address information.

Station MAC address

Displays the MAC Address information.

Real-time synchronize BMC
network parameter values

Press [Enter] to synchronize the BMC network parameter values.

Summary of Contents for G481-HA1





























































































































Search results

Summary of Contents for G481-HA1

Reviews:

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY G481-HA1, Service Manual

Search results

Summary of Contents for G481-HA1

Reviews:

Brands by name

Popular brands