GIGA-BYTE TECHNOLOGY B660 A MASTER DDR4 User Manual Download Page 9

Page: 9 / 44

- 9 -

2-2 Product Specifications

CPU

LGA1700 socket: Support for 12th Generation Intel

Core

™

i9 processors/Intel

Core

™

i7 processors/Intel

Core

™

i5 processors

(Go to GIGABYTE's website for the latest CPU support list.)

L3 cache varies with CPU

Chipset

Intel

B660 Express Chipset

Memory

Support for DDR5 4800/4000 MHz memory modules

Support for DDR4 3200/3000/2933/2666/2400/2133 MHz memory modules

4 x DDR DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity)

of system memory

Dual channel memory architecture

Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in

non-ECC mode)

Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

Support for Extreme Memory Pro

le (XMP) memory modules

(Go to GIGABYTE's website for the latest supported memory speeds and memory

modules.)

Onboard

Graphics

Integrated Graphics Processor-Intel

HD Graphics support:

- 1 x DisplayPort, supporting a maximum resolution of 4096x2304@60 Hz

* Support for DisplayPort 1.2 version and HDCP 2.3

- 1 x HDMI port, supporting a maximum resolution of 4096x2160@60 Hz

* Support for HDMI 2.0 version and HDCP 2.3.

(Graphics speci

cations may vary depending on CPU support.)

Audio

Realtek

ALC1220-VB CODEC

* The back panel line out jack supports DSD audio.

High De

nition Audio

2/4/5.1/7.1-channel

Support for S/PDIF Out

LAN

Intel

2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps)

Wireless

Communication

Module

Intel

Wi-Fi 6 AX201 (For B660 AORUS MASTER PCB rev. 1.0/B660 A MASTER

DDR4 PCB rev. 1.1)

Intel

Wi-Fi 6 AX200 (For B660 AORUS MASTER PCB rev. 1.1/B660 A MASTER

DDR4 PCB rev. 1.2)

- WIFI a, b, g, n, ac, ax, supporting 2.4/5 GHz Dual-Band

- BLUETOOTH 5.2

- Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate

Intel

Wi-Fi 6E AX211 (For B660 AORUS MASTER PCB rev. 1.2/B660 A MASTER

DDR4 PCB rev. 1.3)

- WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands

- BLUETOOTH 5.2

- Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate

(Actual data rate may vary depending on environment and equipment.)

Only for B660 AORUS MASTER.

Only for B660 A MASTER DDR4.

Summary of Contents for B660 A MASTER DDR4













































Search results

Summary of Contents for B660 A MASTER DDR4

Reviews:

Related manuals for B660 A MASTER DDR4

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY B660 A MASTER DDR4, User Manual

Search results

Summary of Contents for B660 A MASTER DDR4

Reviews:

Related manuals for B660 A MASTER DDR4

Brands by name

Popular brands