background image

- 26 -

11)  SATA3 4/5/6/7 (SATA 6Gb/s Connectors)

 

The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA 

1.5Gb/s standard. Each SATA connector supports a single SATA device. The Intel

®

 Chipset supports 

RAID 0, RAID 1, RAID 5, and RAID 10. Please navigate to the "Configuring a RAID Set" page of 

GIGABYTE's website for instructions on configuring a RAID array.

Pin No.

Definition

1

GND

2

TXP

3

TXN

4

GND

5

RXN

6

RXP

7

GND

SATA3 5 7

4 6

1

1

7

DEBUG 

PORT

G.QBOFM

DEBUG 

PORT

G.QBOFM

7

12)  BAT (Battery)

 

The battery provides power to keep the values (such as BIOS configurations, date, and time information) 

in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a low 

level, or the CMOS values may not be accurate or may be lost.

You may clear the CMOS values by removing the battery:

1.  Turn off your computer and unplug the power cord.

2.  Gently remove the battery from the battery holder and wait for one minute. 

(Or use a metal object like a screwdriver to touch the positive and negative 

terminals of the battery holder, making them short for 5 seconds.) 

3.  Replace the battery.

4.  Plug in the power cord and restart your computer.

 

Always turn off your computer and unplug the power cord before replacing the battery.

 

Replace the battery with an equivalent one. Damage to your devices may occur if the battery is 

replaced with an incorrect model.

 

Contact the place of purchase or local dealer if you are not able to replace the battery by yourself 

or uncertain about the battery model.

 

When installing the battery, note the orientation of the positive side (+) and the negative side (-) 

of the battery (the positive side should face up).

 

Used batteries must be handled in accordance with local environmental regulations.

To enable hot-plugging for the SATA ports, please navigate to the "BIOS Setup" page of GIGABYTE's 

website and search for "SATA Configuration" for more information.

Summary of Contents for B660 A MASTER DDR4













































Reviews: