GIGA-BYTE TECHNOLOGY B460M D2V Page 35 User Manual Download

Page: 35 / 43

Administrator Password

Allows you to configure an administrator password. Press <Enter> on this item, type the password, and

then press <Enter>. You will be requested to confirm the password. Type the password again and press

<Enter>. You must enter the administrator password (or user password) at system startup and when entering

BIOS Setup. Differing from the user password, the administrator password allows you to make changes to

all BIOS settings.

User Password

Allows you to configure a user password. Press <Enter> on this item, type the password, and then press

<Enter>. You will be requested to confirm the password. Type the password again and press <Enter>.

You must enter the administrator password (or user password) at system startup and when entering BIOS

Setup. However, the user password only allows you to make changes to certain BIOS settings but not all.

To cancel the password, press <Enter> on the password item and when requested for the password, enter

the correct one first. When prompted for a new password, press <Enter> without entering any password.

Press <Enter> again when prompted to confirm.

NOTE: Before setting the User Password, be sure to set the Administrator Password first.

Secure Boot

Allows you to enable or disable Secure Boot and configure related settings. This item is configurable only

when

CSM Support

is set to

Disabled

Preferred Operating Mode

Allows you to select whether to enter Easy mode or Advanced mode after entering BIOS Setup.

Auto

enters the BIOS mode where it was last time. (Default: Auto)

- 35 -

Summary of Contents for B460M D2V












































Search results

Summary of Contents for B460M D2V

Reviews:

Related manuals for B460M D2V

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY B460M D2V, User Manual

Search results

Summary of Contents for B460M D2V

Reviews:

Related manuals for B460M D2V

Brands by name

Popular brands