Giga-Byte Communications MD30-RS0, User Manual

Page: 32 / 121

- 32 - Hardware Installation
1) SATA_DOM0 (SATA port 0 Jumper)
CAUTION!
• If the SATA DOM power is supplied by the motherboard, set the jumper to pin 1-2.
• If the SATA DOM power is supplied by external power, set the jumper to pin 2-3.
• If a SATA type hard drive is connected to the motherboard, please ensure the jumper is closed
and set to 2-3 pins (Default setting), in order to reduce any risk of hard disk damage.
Please refer to the pin definition table in the following.
Pin No. Definition
1 P5V
2 SATA0 Pin7
3 GND
1
2) ME_UPDATE (ME Update Jumper)
1-2 Close: Normal operation (Default setting)
2-3 Close: ME recovery mode.
1
1