Giga-Byte Communications MD30-RS0 User Manual Download Page 107

Page: 107 / 121

- 107 -

BIOS Setup

2-4-3 BMC network configuration

BMC network configuration

Select NCSI and Dedicated LAN

Switch NCSI and dedicated LAN and send KCS command.

Options available: Mode2(NSCI)/ Mode1 (Dedicated)/Do Nothing. Default setting is

Do Nothing

Lan Channel 1

Configuration Address source

Select to configure LAN channel parameters statically or dynamically (DHCP). Do nothing option willnot

modify any BMC network parameters during BIOS phase.

Options available: Unspecified/Static/DynamicBmcDhcp. Default setting is

Unspecified/Static

Station IP Address

Display IP Address information.

Subnet mask

Display Subnet Mask information.

Please note that the IP address must be in three digitals, for example, 192.168.000.001.

Router IP address

Display the Router IP Address information.

Station MAC Address

Display the MAC Address information.

Real-time synchronize BMC network parameter values

Press [Enter] to synchronize BMC network parameter values.

Summary of Contents for MD30-RS0


























































































































Search results

Summary of Contents for MD30-RS0

Reviews:

Related manuals for MD30-RS0

Brands by name

Popular brands

Giga-Byte Communications MD30-RS0, User Manual

Search results

Summary of Contents for MD30-RS0

Reviews:

Related manuals for MD30-RS0

Brands by name

Popular brands