Giga-Byte Communications MD30-RS0 User Manual Download Page 112

Page: 112 / 121

BIOS Setup

- 112 -

2-6 Boot Menu

The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error

message if the legacy drive(s) specified is not bootable.

Boot Configuration

Setup Prompt Timeout

Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting."

Press the numberic keys to input the desired value.

Bootup NumLock State

Enable or Disable Bootup NumLock function.

Options available: On/Off. Default setting is

Quiet Boot

Enables or disables showing the logo during POST.

Options available: Enabled/Disabled. Default setting is

Enabled

Boot Option Priorities

Boot Option #1/#2/#3#4

Press Enter to configure the boot priority.

By default, the server searches for boot devices in the following secquence:

1.  UEFI device.
2.  Hard drive.
3.  Network device.
4.  USB device

Summary of Contents for MD30-RS0


























































































































Search results

Summary of Contents for MD30-RS0

Reviews:

Related manuals for MD30-RS0

Brands by name

Popular brands

Giga-Byte Communications MD30-RS0, User Manual

Search results

Summary of Contents for MD30-RS0

Reviews:

Related manuals for MD30-RS0

Brands by name

Popular brands