FlashLED 2
Page 15 / 19
Created
23.09.2019
chal
Modified
04.08.2021
chal
Object-ID
123456
4.5 Charging station
The emergency light function can be activated by positioning the magnet.
Emergency light ON: Factory setting
If the supply voltage of the charger fails, the lamp switches to emergency lighting.
Emergency light OFF: If the supply voltage of the charger fails, the light remains switched off. Recommended
for charging from a car battery.
Hint
In the 12-24V version for use in vehicles, the light draws its power from the electrical system, which causes
the car battery to discharge more when the vehicle engine is switched off.
Emergency light OFF position
Magnet
Emergency light ON position
4.6 Emergency light function
When it is in the charging station, the lamp can be switched on and used as a continuous light by
pressing the main switch. Press the main switch again to turn the lamp off.
When the charging station is active, neither the lighting mode nor dimming can be adjusted in contin-
uous light mode; the lamp can only be switched on or off.
If the switched-on lamp is placed in the active charging station, it switches off.
If the switched-on lamp is placed in the inactive charging station, the light stays on (the lamp func-
tions the way it does when disconnected from the charging station).
4.6.1 Emergency light ON
In the event of a power failure, the light switches to emergency lighting within 5 seconds until the power supply
returns (no matter whether it was set to OFF or continuous light beforehand).
4.6.2 Emergency light OFF
When in continuous lighting mode, the lamp turns off when the power fails. When the power supply returns,
the light stays off.