GIESSE RACK MAX 650, Instruction And Installation Manual, Page: 44 / 136

44
▪
Fit and tighten the M8x14 mm countersunk screws (supplied with the connection bar) ,
in the two ends of the bar so that they do not come out.
CONNECTION BARS C/C DISTANCE
Item code Description
Bar length
(mm)
“D”
Actuators c/c
distance (mm)
07456 Connection bar size 1000 mm 1,035 1,000
07457 Connection bar size 1500 mm 1,535 1,500
07458 Connection bar size 2000 mm 2,035 2,000
07459 Connection bar size 2500 mm 2,535 2,500
Special sizes can be ordered from the manufacturer
10.6.
Installation of multiple actuators with a connection bar or
in synchronized mode
RACK MAX 650 actuators can be connected in tandem or in series with a mechanical
connection bar or in synchronized mode. The movement of one actuator is mechanically or
synchronously linked to the other so that motion is transmitted uniformly and at the same
speed.
It is possible to install two or more actuators (M) with one or more drive units (R) to the
window in compliance with the needs required.
The following drawing shows an example of installation with various thrust point solutions
with actuators and rods on large windows or "ribbon" windows. It should be noted that a
maximum of 8 synchronized actuators can be installed with various rod solutions for
additional thrust points.
Configuration
Synchronization
thrust points
No. of
motors
(M)
No. of
drive
units (R)
No. of
thrust
points
Total
force
a 24V/230V mechanical 1 1 2 650N
b 24V/230V mechanical 1 2 3 650N
c 24V/230V mechanical 1 2 3 650N
d1 24V/230V mechanical 2 0 2 1100N
e1 24V/230V mechanical 2 1 3 1100N
f1 24V/230V mechanical 2 2 4 1100N
d2 24V electronic 2 0 2 1100N
e2 24V electronic 2 1 3 1100N
f2 24V electronic 2 2 4 1100N