19
BE24
UK
10 - DIP SWITCH DIP2
ENCODER
2_4
TIME
ON
FUNCTIONING
OFF
changing this setting will
reset the control board and
a new learning cycle will be
required.
Anti crushing active.
-It is not active in the proximity of mechanical end stops.
-After anti crushing intervention the gate will reverse its movement for 1s, after a short
pause the movement will continue at slow speed.
-Subsequently to 3 consecutive anti crushing interventions the control board will
STOP and a user command will be required to start again the motion.
-Anti crushing is not active when working by time ( DIP2_4 = OFF)
2_5
Anti crushing disabled.
ON
ANTI
CRUSHING
OFF
2_6
ON
OFF
2_7
ON
OFF
2_8
ON
OFF
2_9
ON
OFF
2_10
ON
OFF
SPIA
/
FLASHING LIGHT
UNUSED
UNUSED
UNUSED
UNUSED
Terminal M2_7 and M2_8 work as WARNING LIGHT.
Terminal M2_7 and M2_8 work as FLASHING LIGHT.
The settings are stored during the rest phase (gate closed).
The default settings are highlighted in the boxes with grey background.
Description
DIP
Status
Function
Summary of Contents for AS05870
Page 57: ...57 BE24 NOTE NOTES ...
Page 58: ...NOTE NOTES 58 BE24 ...
Page 59: ...NOTE NOTES 59 BE24 ...
