GiantArm D200, User Manual

Page: 35 / 99

35
4. Leveling
Leveling the build platform is very important to the printing quality. Before printing, we need to do hotbed
leveling to ensure the close adhesion between the print models and build platform to prevent the collision
between the nozzle and the build platform. You need to slightly adjust the height of the build platform before
your first printing. Please fine-tune the vertical distance between nozzle and hotbed. 0.1mm is the optimal
value (almost the thickness of a piece of A4 paper).
Note: Before delivery, we have leveled the build platform. Generally speaking, you can directly print.
Although we make the bundled-up packing to GIANTARM D200, the build platform may still incline a bit
during the shipping. To ensure the best printing effect, we suggest that you do the tests and calibration job
according to the following instruction.
4.1 Coarse tuning
Step 1.Choose the button [Leveling] on the setting interface to enter the ‖Leveling‖,
meanwhile the printer will home firstly,then Z axis will rise to 0mm to wait for leveling.
Step 2.Click the leveling point [5], the extruder will move to the middle of the build platform. You can
observe the distance between the nozzle and the platform.