background image

after riding your bicycle. If big punctures occurred on the tire, please replace your tire. 

 

WARNING:

 To avoid damage to your carbon products, please do not store or transport the product in 

a manner that the product is exposed to constant high temperatures. Excessive heat can damage the 
resin that joins the carbon fibers. Giant suggests to ensure that the product is kept a minimum of 
45cm away from any constant source of heat, for example car exhaust, heaters, open fire, etc.   
Do not exceed 150°F (65°C) exposure to your carbon products. 

 

GIANT LIMITED WARRANTY 

Giant warrants it’s WheelSystems for a period of two (2) years from the date of purchase for the original 
owner only. 
This warranty applies only to this product when purchased new from an Authorized Giant Dealer and 
assembled by that dealer at the time of purchase.   

LIMITED REMEDY 

Unless otherwise provided, the sole remedy under the above warranty, or any implied warranty, is limited 
to the replacement of defective parts with those of equal or greater value at the sole discretion of Giant. 
This warranty extends from the date of purchase, applies only to the original owner, and is not transferable. 
In no event shall Giant be responsible for any direct, incidental or consequential damages, including, 
without limitation, damages for personal injury, property damage, or economic losses, whether based on 
contract, warranty, negligence, product liability, or any other theory.   

EXCLUSIONS 

The above warranty, or any implied warranty, does not cover: 

 

Normal wear and tear on parts in situations where there are no assembly or material defects. 

 

Consumable components including tires, rim tapes, spokes, brake pads, bearing and sealant. 

 

Any damage by using non-Giant's recommended brake pads and tires for your WheelSystem. 

 

Products serviced by other than an Authorized Giant dealer. 

 

Modifications of the product from its original condition. 

 

Use of this product for abnormal, competition and/or commercial activities or for purposes other than 
those for which this product was designed. 

 

Damage caused by failing to follow the User’s Manual. 

 

Paint, finish and decal damage resulting from taking part in competitions, jumping, downhill and/or 
training for such activities or events or as a result of exposing the product to, or operating the product 
in, severe conditions or climates. 

 

Labor charges for part replacement or changeover. 

Except as is provided by this warranty and subject to all additional warranties, Giant and its employees and 
agents shall not be liable for any loss or damage whatsoever (including incidental and consequential loss or 
damage caused by negligence or default) arising from or concerning any Giant product. 
Giant makes no other warranties, express or implied. All implied warranties, including the warranties of 
merchantability and fitness for a particular purpose are limited in duration to that of the express warranties 
stated above. 
Any claim against this warranty must be made through an Authorized Giant Dealer or distributor. The 
purchase receipt or other proof of the date of purchase is required before a warranty claim may be 
processed. 

Summary of Contents for Hookless WheelSystems











Reviews: