ASSEMBLY A
It is recommended to use GIANT WheelSystems with GIANT Tubeless Systems
CAUTION
：
When installing GIANT Tubeless Systems (including rim tape, tubeless valve, tubeless sealant, and tubeless
tire), please refer to the set up instructions issued by GIANT or consult your local authorized GIANT retailer.
STEP1.
To achieve the best cycling performance, we
strongly recommend the use of GIANT Tubeless System
products (rim tape, tubeless valves, tubeless sealant, and
tubeless tires) in combination with your GIANT Tubeless
WheelSystem. GIANT Tubeless System products can be
purchased from your local authorized GIANT retailer.
STEP2.
When installing a tubeless tire on your GIANT
Hookless WheelSystem, use it in combination with the
GIANT tubeless rim tape, tubeless valves, tubeless sealant
and tubeless tire.
STEP3.
When installing the rim tape, Ensure the tape is set
in the center of the rim bed, covers the entire width of the
tire well and make sure that the tape overlaps 15cm on
both sides of the valve hole (see Figure 1).
STEP4.
For the installation of the tubeless valve, please
see Figure 2 and Figure 3. Ensure that the provided
O-ring seal is positioned correctly between
lock-ring and rim (see Figure 2) Attach the lock-ring
to the valve and tighten it finger tight. Do not use
any kind of tools to tighten the valve lock-ring.
STEP5.
For the installation of tubeless tires, please
see “ASSEMBLY B, How to install tubeless tires on
GIANT Tubeless WheelSystem.”
STEP6.
For filling the sealant, please see
“ASSEMBLY C, How to add sealant into GIANT
Tubeless WheelSystem.”
WARNING!
The use of a tubeless tire with GIANT Tubeless WheelSystems without GIANT recommended tubeless
rim tape and tubeless valves can result in inflation failure.
We strongly advice against the use of tire levers when installing the tubeless tire as this may cause
structural damage to the tire and/or rim, resulting in inflation failure or sudden loss of air pressure.
Use of a tubeless tire with a GIANT Tubeless WheelSystems without tire sealant may result in poor air
retention and/or lead to sudden air loss in the event of a puncture.
To achieve the puncture sealing performance, use only GIANT sealant. Using non- GIANT sealant may
result in corrosion (tire, rim, and rim tape) or sticky tire and rim, which may lead to abnormal
disassembly
CAUTION
：
Summary of Contents for Hookless WheelSystems
Page 1: ......
Page 2: ...ENGLISH...
