3
unit assembly
Note: Please refer to Parts List for correct part identification and placement.
FRONT WHEEL ASSEMBLY
•
Place
Mounting Bracket (Parts List Ref. #28)
against lower right corner of
Blower Housing
(1)
, aligning holes in bracket with holes in
housing. Secure with three
3/8-16 x 3/4” hex
bolts, split lock washers
and
flat washers
(29-31)
. Tighten securely.
•
Install
Front Wheel (32)
between forks in
bracket and secure with
5/8-11 x 5” hex bolt
and
lock nut (33-34)
. Tighten snugly while
allowing for free rotation of wheel.
HANDLE ASSEMBLY
•
Fit
one
Vibration Mount (36)
, long thread up,
into each of the two holes in each
Lower
Handle (35).
Secure with one
5/16-18 small
serrated flange nut (37).
Do not tighten.
•
Set lower handles
into engine base, along
either side of engine, aligning threads in
vibration mounts with corresponding holes in
base. Secure each mount from beneath with
5/16-18 small serrated flange nut (37)
. Do
not tighten.
•
Slip
one
Handle Shim (38)
into top of each
lower handle, aligning holes in shim with holes
in lower handle.
•
Fit
Handle Support Panel (39)
over top portion
of lower handles.
