Giant-Vac 10BA Assembly Instructions Operator'S Manual Parts List Download Page 16

 

 

 
 

warranty 

 

 

GIANT-VAC, INC.,

 here-in-after called Giant-Vac, will warrant each new Giant-Vac product 

to be free from manufacturing defects in normal service for a period of two (2) years for 
consumer use, one (1) year for commercial use, or thirty (30) days for rental use.  This warranty 
extends only to the original purchaser of the product and cannot be transferred.   This 
warranty does not apply to engines, tires or other items that are purchased by Giant-Vac 
and warranted by the manufacturer of such items.  Items such as bags, grass catchers, hoses 
and blades are not warranted, as these are considered expendable items.  This warranty 
does not include equipment failures due to normal wear. 
 
Any obligation under this warranty is expressly limited to the replacement or repair, at an 
authorized servicing Giant-Vac dealer, or at a point designated by us, of such parts as 
appear to us to have been defective.  All defective parts have to be returned freight 
prepaid before credit will be issued. 
 
We shall not be liable for transportation charges in connection with the replacement or 
repair of defective parts. 
 
This warranty does not apply to a Giant-Vac upon which repairs or alterations have been 
made by others except with our prior written approval. 
 
We shall not be liable for consequential damages or contingent liabilities for the fitness of any 
Giant-Vac for any particular purpose. 
 
We make no other express, implied or statutory warranty, nor is anyone authorized to make 
any in our behalf. 

 

 
 
 
 
 
 
 

 

 

 

P.O. BOX 195 

SOUTH WINDHAM, CT.  06266 

PHONE:   860-423-7741 

 FAX:   860-423-2654 

 

 

Summary of Contents for 10BA

















Reviews: