10
14) Mount bearing cover (14A) and tighten screws (17) to 64 Ft-lbs. Adjust axial play (clear-
ance) on the crankshaft to minimum 0.1 mm / max. 0.15 mm using shims (21A/21B). The
shaft should turn easily with little clearance. Connecting rod must sit exactly in the middle
of each crank pin. Fit the bearing cover (14) and tighten the screws (17) at 64 Ft-lbs. Seal
(32A) must always be installed so that the seal lip on the inside diameter faces the oil. Pos-
sible axial fl oat of the seal adapter (33) to be compensated with shims (33C).
Mount cooling plate (K1) and gear cover (K3) with their respective seals (K2). When as-
sembling the cooling circuit line, make sure that the oil cooler connection (K7) is always
joined to the upper connection (K3) of the gear cover.
Repair Instructions - GP8035 Pump
