Copyright All Rights Reserved.
P-MU-DG-900 Ver. D Publish: 2010.08.23 Page: - 2 -/ 6
III. Indicator Status & Default Setting Parameters
Beep & LED Indication
Mode Signal
Status
Yellow (Slow Flash)
Power on, Standby
Green On
Valid entry, first relay active
Standby
Red On
Second relay active, invalid card/PIN
Yellow (Rapid Flash)
Enter programming mode
Green On (Rapid Flash)
Green Stay On
The slot position of Relay 1 is available.
The slot position of Relay 1 is unavailable.
LED
Programming
Red On (Rapid Flash)
Red Stay On
The slot position of Relay 2 is available.
The slot position of Relay 2 is unavailable.
1 Beep
Valid card, key press, enter programming mode
Standby
4 Beeps
Invalid card, incorrect PIN
1 Beep
Input data is correct, exit programming mode
Beep
Programming
3 Beeps
Input data incorrect, other incorrect operation, duplicated
card settings
Factory Default Setting
Access Mode
Proximity Card Only
Format All
Bits
Card Storage (MAX. 1000+10 pcs)
None
Master Code
12345 (5 digits)
Alarm Functions (All)
Function disabled
Relay Strike Time (Time Delay Setting)
1 second
Pressed Key Time Delay
5 seconds (Fixed)
Programming Mode Time Delay
25 seconds (Fixed)