Trouble Shooting
Cleaning
1. Turn the Blender to the ‘off’ position (0) and unplug from the mains socket and
allow to cool.
2. Wash the Blender Jug and Grinder in warm soapy water with a soft damp cloth.
Do not use abrasive materials or cleaning products as this will damage them.
THESE ITEMS ARE NOT DISHWASHER SAFE.
TAKE EXTRA CARE WHEN CLEANING THE BLADES AS THEY ARE VERY
SHARP.
3. Do not immerse the main unit in water. Wipe down with a soft damp cloth.
For stubborn marks or mixtures that are thicker and more difficult to clean;
1. Pour warm water into the Blender Jug, lock the lid into position and turn the
control dial to the ‘pulse’ setting. You will see the mixture will come away from
the jug sides.
2. Turn the blender to the ‘off’ position (0) and unplug from the mains socket.
3. Continue the cleaning process from step 2 above.
4. Allow the appliance to dry out thoroughly before storage.
7
Problem
The unit cannot be switched on.
The blades do no appear to be
turning.
My mixture is not blending evenly.
Food is sticking to the side of the
Blender.
Possible Cause
The Blender Jug is not locked
into the main unit correctly.
The blade may be jammed.
The mixture is too thick to
process.
The ingredients you are processing
may be too big.
You may be trying to process a
large quantity of ingredients at the
same time.
The mixture may be too thick.
Solution
Switch off the Blender and unplug from
the mains socket. Check the jug is
securely locked into position on the main
unit and retry.
Switch off the Blender and unplug from
the mains socket. Carefully remove
ingredients blocking the blade.
You may need to blend in smaller batches.
Ensure ingredients are cut into small
enough pieces before blending.
For best results, process in smaller
batches.
Switch off the Blender and unplug from
the mains socket. Using a plastic spatula
carefully scrape the food from the wall of
the jug.
More liquid may be required OR you may
need to PULSE in short bursts.