2. Maintenance
As a high-tech product with sophisticated structure, Giada Mini PCs needs to be
maintained with properly. Misuse or rough handling may result in damage or
system failure.
·
Body
Please do not randomly remove the protective film on the body of the host,
and prevent sharp objects from scratching on it. Make sure the power supply
to the host is cut off before cleaning the body. Never use wet cloth for cleaning.
Otherwise, water drops or other conductive liquid may go into the host.
To clean the base of the host, you should first remove the host. At the time,
you should put the host in a safe place where is won’t slide down or fall onto
the ground.
·
Handling
This product is an ultra-light PC
Never place the product at the edge of the table. Otherwise, it may fall on the
ground and be damaged.
Always check the peripheral equipment and the connection cables to see
whether they are properly arranged, so that people might not be stumbled by
the wire or equipment and equipment not damaged.
·
Radiation
Radiation is of great significance for PCs. Please place the product in a proper
position. Never block the air inlet and air outlet that are used for ventilation.
Do not place the product onto the bed, sofa or other soft objects for use.
Otherwise, the vents might be blocked and machine dies because of the
excessive heat.
·
Interfaces
Never use other objects to jam the interfaces on the host, nor use sharp
objects to scratch the pins. Otherwise, the pins might be damaged. If there is
any poor contact, you can use a soft brush to dust the place.
www.giadatech.com
20
