9
·
Under power-on mode, press “TIMER” to setup power-off timer. Timer indicator
turns on.
Dehumidifying mode
·
Press “MODE” to select dehumidifying mode, dehumidifying mode indicator turns
on .
·
Under dehumidifying mode, sleeping function cannot be setup, and fan speed is low.
Sleeping mode
·
Press key
“
SLEEP
”
enter into sleeping mode, default value of fan speed is low.
·
When sleeping mode turns on , under cooling mode, the first one hour later, setting
temperature will go up 1
℃
, the second one hour later, setting temperature will go
up another 1
℃
, and then keep the same .
·
Sleeping mode is invalid under dehumidifying and fan mode. Under water full,
machine standby and mode conversion, sleeping mode will be cancelled .
Compressor protection
·
Three minutes later after power on / restart, compressor starts to run.
Water Drainage
This machine with auto-water-evaporating system. Condensed-water cycle to cool
down the condenser, which will not only improve cooling efficiency, but also save
energy.
·
If inner water tank is full, light will flashed on the screen , 8 seconds later machine enter
into standby mode, buzzer shouts , compressor stops and all keys is invalid till machine
recovers to be normal .
·
Pull out the plug to drain out water, power off the machine and restart it , the machine will
runs normally .