GIA GIA-PB-09P16 Owner'S Manual Download Page 3

 

  

IMPORTANT SAFEGUARDS

 

Please read following safeguards carefully before using the machine:

 

·

This machine just for domestic use, please don’t use it in any other places. 

·

Please use this machine indoor not outdoor, and place it in a dry environment. 

·

Don’t use the machine when any damage in power cord, plug or machine itself. 

Any damage, please contact professional serviceman for help. If need to lengthen 

power cord, extended cord can be used, but please don’t let the power cord scatter on 

the work area. 

·

Please make the machine far from heat sources and power supply , and avoid direct 

sunlight. 

·

Please turn-off the machine first before pull out the plug. 

·

Please pull out the plug when the machine is under cleaning, parts-replacement or 

leaving unused. 

·

Please clean the machine based on the instruction in user’s manual. 

·

Please make sure using voltage meet requirements, the damages caused by 

connection error is out of the scope of warranty. 

·

Don’t let little children touch the machine. 

·

Don’t run the machine when no one there, even if a short leave, please turn-off it. 

·

Don’t tug power cord when pulling out plug or moving the machine. 

·

Don’t put the machine on a place with water or other liquid. 

·

Don’t spatter water or oil into machine. 

·

Don’t put hard objects between fan blades. 

·

Don’t repair the machine by yourself. Dealing with problems by non-professional 

person may cause danger, even power cord replacement must be done by professional 

electrician. 

·

Only use accessories from suppliers, otherwise danger and damages of the machine 

may be caused. 

 

Summary of Contents for GIA-PB-09P16













Reviews: