79
E-HYBRIDE TRAIL 9000 LADY / MAN
E-HYBRIDE TRAIL 4000 LADY / MAN
E-HYBRIDE STREET LADY / MAN
Malfunction
Possible cause(s)
Remedy
The drive does
not switch off
completely
although the
pedalling
movement is
stopped.
The axle nuts on the rear wheel have been
loosened and not re-tightened correctly.
This affects the measurement system of
the drive, which is required to determine
the degree of assistance required, in a
negative way. A faulty control system is the
consequence.
NOTE:
Only your specialist bicycle dealer is
allowed to carry out work on the rear
wheel!
Calibrate the drive temporarily in
accordance with
section 8.5.2.
Then take your EPAC to your specialist
bicycle dealer without delay.
Drive starts
unintentionally
If you place your foot on the pedal and
move the wheels slightly, the electric drive
will start up.
· You should only put your foot
on the pedal when you actually
want to move off.
· Always operate both brakes in
a stationary position and only
release them when you actually
want to move off.
Drive reacts after
a delay
Measurement system of the drive not
calibrated
Calibrate the drive in accordance with
section 8.5.2.
Drive does not run
smoothly
Measurement system of the drive not
calibrated
Calibrate the drive in accordance with
section 8.5.2.