Ghost Acoustic/MIDI system, User Manual

Page: 23 / 32

Mounting the Tone Control
Variable Control Layouts
Carefully consider the placement of the Tone Control
module, not only in terms of locating the controls con-
veniently, but also making sure it will fit in the guitar as
you expect. Check before you drill, for braces, kerfing, or
other obstructions on the under side of the guitar top.
To achieve an aesthetically pleasing control layout,
remove the nuts and washers from the three pots,
and lay the washers on the guitar top. Slide them
around until they look just right, keeping the outer
two 2-1/2” (63.5mm) apart to mount the Tone Con-
trol Module. The placement of the third hole is lim-
The two outer pot shafts are fixed to the Tone
Control Module, but the middle pot is on a wir-
ing harness, so it can be positioned as you
like, forming a triangular group of controls.
21