-05-
COMMANDER TRANSMITTER MODE - 1
CH 1
CH 4
CH 2
CH 7
CH 5
CH 6
CH 9
CH 8
CH 3
FUNCTION INTRODUCTION
Retract Landing Skid
Flight Mode
Intelligent Mode
Roll or Pan
IOC ON
IOC OFF
Forward
Backward
Power LED
Binding
ON / OFF
Power
Rudder
M1 / M2 Selection
Aileron
Take Off
Landing Assist
Return Home
100% Full speed
55% Hovering
25% Start
0% Standby
Charging Jack
Gimbal Trim
Gimbal Trim
Elevator
Throttle
Tilt
1. MODE 1
Altitude Control (CH 3) is at right joystick / Up and Down
Forward / Backward Control( CH 2) is at left joystick / Up and
Down
2. CH 2 / CH 3 position will be switched when changing the
mode.
3. CH 1~CH 4 Joystick Function
CH 1: Aileron - Roll Control
CH 2: Elevator - Forward / Backward Control
CH 3: Throttle - Altitude Control
CH 4: Rudder - Yaw Control
4. CH 5: Intelligent Mode
IOC (Intelligent Orientation Control)
IOC OFF
: When IOC switches to the “OFF” mode, the IOC
function will be dismissed.
IOC ON
: When IOC switches to the “ON” mode, the
quadcopter will be heading locked intelligently and oriented
to its original take off point.
5. CH 6: Flight Mode
Take Off Mode
When the GPS antenna receives 7 signals from the
satellite, it will switch to the GPS mode automatically.
Landing Assist
The Landing Assist will automatically decelerate and
stabilize the quadcopter when in landing, the function will be
activated when quadcopter is within 2M from the ground.
Return Home
The Return Home feature will autopilot the quadcopter back
to the original take off point and proceed the landing
automatically.
6. CH 7: Gimbal Trim
Trim the Roll or Pan of the Gimbal
7. CH 8: Gimbal Trim
Trim the Tilt of the Gimbal
8. CH 9: Retract Landing Skid
To control the Retract Landing Skid uplock / downlock
