background image

STEP 2: SECURING PANEL TO POST 
Determine the installation site for the solar panel.
Secure the solar panel assembly to a wooden post or 

fence using two pipe clamps (C) and four lag bolts (B)  

as shown in the illustration to the right. If your fence post 

is metal, you will need alternative hardware not provided, 

(e.g., U-clamps or sheet metal screws).
*If the solar panel must be placed more than 10 ft.  

from the control box in order to receive direct sunlight,  

you can use up to 100 ft. of multi-stranded, GHOST 

CONTROLS

®  

16 gauge, direct burial, low-voltage wire 

(AXLV). NEVER use solid core wire.
IMPORTANT: 
—  To provide secure and moisture resistant splices  

for solar panels use a direct burial splice kit for ALL  

splices. These splice kits can be found at hardware  

and electrical supply stores.

—  For optimal efficiency, wipe the face of the panel  

frequently with a soft, damp cloth.

—  The output of the Solar Panel is variable during the day 

depending on the intensity of the sun and the angle of  

the rays striking the panel. The output may vary from a 

few millivolts to as much as 22 volts. To check the output, 

simply disconnect the solar panel leads from the control  

board and connect them directly to a DC voltmeter. In  

bright sunlight the panel output should read at least  

18 volts DC.

STEP 3: ATTACHING WIRE TO CONTROL BOARD
Make sure control board switch is in the OFF position. 

Feed the free end of the solar panel wires into the  

control box and attach them to the appropriate terminals 

on the control board. The RED solar panel wire goes to 

the (+) POSITIVE solar terminal and the BLACK solar pan-

el wire goes to the (–) NEGATIVE solar terminal. If there is a 

plastic plug inserted into the negative solar terminal please  

remove before inserting black solar panel wire. 

Improper  

installation of these wires will damage the opener’s control board.

NEVER USE THE SOLAR PANEL AND THE  

AC TRANSFORMER AT THE SAME TIME!  

It will damage the control board and void your warranty.

WARRANTY:
GHOST CONTROLS

®

 Solar Panels are warrantied 

for 18 months with proof of purchase. An additional 6  

month warranty is available at NO COST if you register your solar panel within 30 days of purchase on  

www.ghostcontrols.com/register. See warranty terms on www.ghostcontrols.com/warranty.
For more information on GHOST CONTROLS

® 

Automatic Gate Openers and Accessories please visit our website 

at www.ghostcontrols.com.

C

B

PANEL NEEDS TO

FACE SOUTH AND

GET 8 HOURS OF

SUN

B

C

CONTROL PANEL 

BLACK

RED

AXDPIM | REV 0516

©2016 GHOST CONTROLS

®

Reviews: