H61.0.RS.6C-04
Operating Manual RS MH 3161-
… - ex
page 5 of 14
11.
DANGER
Do not use these products as safety or emergency stop devices or in any other application
where failure of the product could result in personal injury or material damage.
Failure to comply with these instructions could result in death or serious injury and material
damage.
12.
DANGER
This device is not constructed for use in medical applications.
13.
Non intrinsically safe use:
The devices can also be used as non intrinsically safe device for connection of non intrinsically
safe devices (i.e. power supply unit, interface converter, etc.).
Only approved accessories must be used at this operation mode, too!
Before the device is used as intrinsically safe device again, you have to check for visible
damages and control functionality before you put it to the leather bag!
14.
Any changes or repair of the device is not allowed.
Please return device to manufacturer for repair or maintenance.
3 Product Specification
3.1 Scope of supply
The scope of supply includes:
Measuring device with 9V battery
Operation manual
Leather case
3.2 Operation and maintenance advice
1.
Battery operation:
If ‘bAt’ is shown in the lower display the battery has been used up and needs to be replaced. However,
the device will operate correctly for a certain time. If ‘bAt’ is shown in the upper display the voltage is too
low to operate the device; the battery has been completely used up.
The battery has to be taken out, when storing device above 50 °C.
We recommend taking out battery if device is not used for a longer period of time.
After recommissioning the real-time clock has to be set again.
