H61.0.RS.6C-04
Operating Manual RS MH 3161-
… - ex
page 3 of 14
1 General Note
Read this document carefully and get used to the operation of the device before you use it. Keep this
document within easy reach near the device for consulting in case of doubt.
Mounting, start-up, operating, maintenance and removing from operation must be done by qualified,
specially trained staff that have carefully read and understood this manual before starting any work.
The manufacturer will assume no liability or warranty in case of usage for other purpose than the intended
one, ignoring this manual, operating by unqualified staff as well as unauthorized modifications to the device.
The manufacturer is not liable for any costs or damages incurred at the user or third parties because of the
usage or application of this device, in particular in case of improper use of the device, misuse or malfunction
of the connection or of the device.
The manufacturer is not liable for misprints.
2 Safety
2.1 Intended Use
The safety requirements (see below) have to be observed.
The device must be used only according to its intended purpose and under suitable conditions.
Use the device carefully and according to its technical data (do not throw it, strike it, …)
Protect the device from dirt.
2.2 Safety signs and symbols
Warnings are labeled in this document with the followings signs:
DANGER
Caution!
This symbol warns of imminent danger, death, serious injuries and
significant damage to property at non-observance.
Caution!
This symbol indicates a potentially dangerous situation in explosion-
prone areas that can result in death or severe injuries if not avoided.
Attention!
This symbol warns of possible dangers or dangerous situations which
can provoke damage to the device or environment at non-observance.
Note!
This symbol point out processes which can indirectly influence
operation or provoke unforeseen reactions at non-observance.
