manualshive.com logo in svg

GHM GREISINGER GFTH 200 Kal, Operating Manual

Share
Download
GHM GREISINGER GFTH 200 Kal Operating Manual Download Page 31

GMH 3331

Service | 12

B-H77.0.01.DB2-1.0

31 / 32

12 Service

12.1 Manufacturer

If you have any questions, please do not hesitate to contact us:

Contact

GHM Messtechnik GmbH

GHM GROUP - Greisinger

Hans-Sachs-Str. 26

93128 Regenstauf | GERMANY

Email: 

[email protected]

 | 

www.greisinger.de

WEEE reg. no. DE 93889386

12.2 Repairs processing

Defective products are repaired professionally and quickly in our service centre.

Open hours and contact

Monday to Thursday from 8:00 to 16:00

Friday from 8:00 to 13:00

GHM Messtechnik GmbH

GHM GROUP - Greisinger

Hans-Sachs-Str.26

Service Centre

93128 Regenstauf | GERMANY

Tel: +49 94029383-39

Fax: +49 94029383-33

[email protected]

 NOTE

Fill in the return form available from the information base online at 

www.ghm-group.de

and sent it in with the product.

12.3 Sales offices

North Sales Office

Post code:

00000 – 25999 | 27000 – 34999

37000 – 39999 | 98000 – 99999

Email:

[email protected]

Tel:

+49 4067073-0

Fax:

+49 4067073-288

West Sales Office

Summary of Contents for GREISINGER GFTH 200 Kal

































Reviews:

No comments

Brands by name

Popular brands

Load more brands