GMH 3331
Operation | 5
B-H77.0.01.DB2-1.0
13 / 32
5 Operation
5.1 Commissioning
5.1.1 Explanation
Description
The product is switched on with the
On/Off button
. It may be necessary to configure
the product after switching on. See
Prerequisite
Instruction
– Press the
On/Off button
.
Outcome of an action
Information about the configuration of the product appears in the display.
– The product is now ready for measurement.
5.2 Configuration
5.2.1 Explanation
The following steps describe how to adapt the product for your purposes.
NOTE
There are various configuration parameters available depending on the product ver-
sion and configuration. They can differ depending on the product version and configur-
ation.
5.2.2 Opening the configuration menu
Description
In order to configure the product, you must first open the
Configuration
menu. The
menu is opened as shown in the illustration.
Prerequisite
Instruction
1. Press the
Function key
for 2 seconds to open the
Configuration
menu.
2.
SET [ONF
appears in the display. Release the function key.
3. By briefly pressing the
set
button, you can scroll through the submenu of the
Con-
figuration
menu. Select the parameter you would like to configure with the
cal
but-
ton.
4. When you have selected the desired parameter, change the parameter to the de-
sired value with the
max
button and the
min
button.
5. The changes are saved by pressing the
set
button again.
6. The
Configuration
menu is exited with the
store
button.
Representation
Call up menu
Select sub-
menu
Select para-
meter
Change value
Exit menu and
save changes
Press: Single
step
Hold: Rapid
change
Outcome of an action
You exit the
Configuration
menu with the
store
button and return to the main display.
