background image

E40.0.1X.6C-07 

Operating Manual EB-

Logg 80K… 

page 4 of 14 

2.4  Safety guidelines 

This device has been designed and tested in accordance with the safety regulations for 
electronic devices. However, its trouble-free operation and reliability cannot be guaranteed 
unless the standard safety measures and special safety advises given in this manual will be 
adhered to when using the device. 

1. 

 

Install the displaying device according to the manufacturer's specifications and 
the valid standards and regulations. 

2. 

 

Modifications or repairs of the device may not be performed by the customer. 
For maintenance or repair the device must be sent to the manufacturer. 

3. 

 

Trouble-free operation and reliability of the device can only be guaranteed if the 
device is not subjected to any other climatic conditions than those stated under 
”Specification”. 

To protect the battery, the maximum permissible storage and transport 
temperature of the device is 70 °C

 

4. 

 

Trouble-free operation and reliability of the device can only be guaranteed if the 
device is not subjected to any other climatic conditions than those stated under 
“Specification”. 

5. 

 

When connecting the device to other devices (e.g. PC) the interconnection has to 
be designed most thoroughly as internal connections in third-party devices (e.g. 
connection GND with protective earth) may lead to undesired voltage potentials. 

6. 

 

If there is a risk whatsoever involved in running it, the device has to be switched 
off immediately and to be marked accordingly to avoid re-starting. 

Operator safety may be a risk if: 

  - there is visible damage to the device. 

  - the device is not working as specified. 

  - the device has been stored under unsuitable conditions for a longer time. 

In case of doubt, please return device to manufacturer for repair or maintenance. 

7. 

 

Do not use these products as safety or emergency stop devices or in any other 
application where failure of the product could result in personal injury or material 
damage. 
Failure to comply with these instructions could result in death or serious injury 
and material damage. 

8. 

 

This device must not be used at potentially explosive areas! 

9. 

 

This device must not be used at a patient for diagnostic or other medical pur-
pose. 

 
 

 

Summary of Contents for GREISINGER EB log 80 K SMB2















Reviews: