HD2328
- 8 -
V1.7
The A-B key is used for the following functions:
•
A-B: in measurement mode, it displays in the secondary line the difference of the
temperatures measured by the probes connected to the inputs A and B, and
indicates "ERR" if one of the probes is in error (not connected, faulty or
overrange). To end the function, press the key again.
•
MENU: in the menu three items can be set:
1.
Selection of the unit of measurement for temperature: °C or °F.
2.
Selection of the type of Thermocouple: K, J, T, E.
3.
Starting the User calibration procedure.
-
the menu is opened by pressing simultaneously DATA+(A-B): the first item of the
instrument programming menu will appear;
-
use the
and
arrows (respectively located above the HOLD and REL keys) to
modify the displayed value;
-
press DATA/ENTER to confirm the modification and go onto the next item;
-
press CLR/ESC to cancel the modification;
-
to exit the menu, press the A-B/MENU key again.
The REL key is used for the following functions:
•
REL: it displays the difference between the current value and that measured on
pressing the key for both measurements: main and secondary. The "REL" message
is displayed on the left. To return to the normal measurement, press the key
again.
•
: once the MENU has been opened with the DATA+(A-B) keys, the
key will
allow to decrease the value of the selected parameter.
REL/
key
A-B/MENU key
Summary of Contents for Delta OHM HD2328.0
Page 4: ...HD2328 4 V1 7 Thermocouple Thermometer HD2328 0 ...
Page 19: ......
