GHM Group
– Martens
GHM Messtechnik GmbH | Kiebitzhörn 18 | 22885 Barsbüttel | Germany
Phone +49-40-670 73-0 |
| www.ghm-group.de
24
5 Device transport and storage
Gentle and tension-free packaging of the housing must be ensured for transport (no
machine wrapping of the package).
The device must be stored in the environmental conditions specified in the tech-
nical data.
6 Return to manufacturer
The legal regulations for environmental protection and our personnel re-
quire that devices which are sent back which have come into contact with
liquid are handled without risk to people or the environment.
If you send a device back to us for inspection or repair, we must request
that you strictly observe the following requirements:
On the GHM homepage under: 'Downloads/forms' a return shipment form can be
downloaded.
The repair can be performed quickly and without call-back questions if:
1.
a filled-in form is provided for each device,
2.
the device has been cleaned and packaging which prevents damage to the
device is used, and
3.
a safety data sheet for the measuring medium is affixed to the outside of the
package, if the device has come into contact with a critical substance.
7 Disposal
Separation by material and recycling of device components and packag-
ing must take place when the device is disposed of. The valid legal regu-
lations and directives applicable at the time must be observed. The de-
vice may not be disposed of with household waste. If the device should
be disposed of, return it to us with the return shipment form filled in under section 6
Return to manufacturer. We will then arrange for the proper disposal.
8 Imprint
GHM GROUP - Martens
GHM Messtechnik GmbH | Kiebitzhörn 18 | 22885 Barsbüttel
Managing Director:
Dipl.-Ing. (FH) of Process and Environmental Technology Johannes Overhues
Registered office: Schloßstr. 6,
88453 Erolzheim / Germany
Ulm District Court, Commercial Register Section B 730462 Copyright: GHM Mess-
technik GmbH. All rights reserved. Reprints, digital use of any type, and duplication
may only take place with the written authorisation of GHM Messtechnik GmbH.
DANGER
Summary of Contents for STL50Ex
Page 25: ...25 9 Declaration of Conformity ...
Page 27: ...27 ...
