S01.0.0X.6C-19
Installation and Operating Manual GEWAS 191 AN / N
page 2 of 6
Index
NSTALLATION OF THE SOLENOID VALVE
NSTALLATION OF THE CONTROL UNIT AND THE WATER SENSOR
............................................................................. 4
1
Intended use
The GEWAS 191 N / AN is an alarm and protection device. The solenoid valve is to be mounted tight between a wa-
ter tap with ¾” thread and the machine hose.
If a water film is detected at the sensor, the valve will be closed and the unit warns with an intense signal tone.
The GEWAS 191 AN also switches off the device (e.g. washing machine, dish washer) connected to the control de-
vice.
To be able to operate safely the device has to be checked for its correct function at regular basis. (please refer to
Operating and maintenance advices of this document).
Operation is only allowed with the defined scope of supply or with original accessory for this device.
Application range:
Alarm and protection device for prevention of water damage
Observation of devices and machines with water-connection
Another or a further use is considered as not being in compliance with the intended use.
The operator of the device is liable for any resulting damage or harm.
Follow the installation description, when connecting to water supply.
2
General Note
Read this document carefully and get used to the operation of the device before you use it. Keep this document
within easy reach near the device for consulting in case of doubt.
3
Scope of supply
1
x
control device GEWAS 191 N or GEWAS 191 AN
1
x
water sensor GWF-1S
1
x
solenoid GMV 191 / 12VDC with integrated sieve sealing
solenoid valve
GEWAS control unit
water sensor
with integrated sieve sealing-ring
