Bedienungsanleitung
As of 04/20/2010
Seite 8/16
Example:
In case of a
ProfiLux 3 eX
with a
PLM-Oxygen
card and an
Expansion Box
with a
PLM-Humidity-Temp
and a
further
Expansion Box
with a
PLM-ADIN
, the sensors are assigned in the following way:
Level 1 …, pH-value 1, Temperature 1, Conductivity (S) 1 and Redox 1 are the internal sensor inputs of
ProfiLux 3 eX
. Thereafter the sensor of the
PLM-Oxygen
card in the ProfiLux follows.
Level 4 …, Temperature 2, Conductivity (S) 2 and Redox 2 are the internal sensor inputs of the first (found
by ProfiLux)
Expansion Box
. Airtemperature 1 and Humidity 1 originate from the
PLM-Humidity-Temp
in
this Expansion Box.
Level 7 …, Temperature 3, Conductivity (F) 1 and Redox 3 are the internal sensor inputs of the second
(found by ProfiLux)
Expansion Box
. Voltage 1 and Voltage 2 originate from the
PLM-ADIN
in this
Expansion Box.
If – for example – an additional
PLM-CondF
card is inserted after the
PLM-Humidity-Temp
in the first
Expansion Box
, Conductivity (F) 1 would be shown for it. The conductivity sensor of the second
Expansion
Box
then would be named Conductivity (F) 2.
