www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
ENGLISH
- 15
Alarm
Meaning
Solution
AL_24: Traction
Batt Connection
Battery not connected to
the function card
Check the traction operating
mode. High traction motor
working current detected.
AL_25: General
Keyp connection
No control panel-function
communication
Check connections between
the keypad card and func-
tions.
11.1 DRAINING THE
RECOVERY WATER
(Fig. 15)
At the end of the washing cycle or when the
recovery water tank (14) is full, it is neces-
sary to empty the tank by proceeding as fol-
lows:
NOTE:
To dispose of the recovery water, comply
with the standards in force in the country in
which the machine is used.
- Position the machine near to a drain out-
let.
- Disconnect the hose (12) from the sup-
port.
- Remove the cap (56) from the hose (12)
and drain all the water contained in the
tank.
NOTE:
The amount of water that comes out can be mod-
ulated by pressing on the end of the tube (12).
- Put the cap (56) back on the hose (12)
and reposition it on the relative support.
12.1 MAINTENANCE AND
CLEANING
WARNING:
All maintenance operations must be per-
formed with the machine off and tanks
empty.
OPERATIONS TO
PERFORM DAILY
12.1.a - Emptying and cleaning the
clean water tank (Fig. 16)
WARNING:
At the end of the washing operations, it is
compulsory to drain and clean the clean
water tank (5) to prevent deposits or scal-
ing.
After draining the recovery water tank, drain
the clean water tank as follows:
- Position the machine over a drain outlet.
- Disconnect the tube (15) from the hooks,
close the tap (53), lower the tube to the
ground on the drain outlet, open the tap
Manuale FRECCIA RAPID 30 Touch_49026100_2ed_07-2018.indd 15
23/07/18 16:24
