Ghibli & Wirbel FR30 Touch, Use And Maintenance

Page: 17 / 32

www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
ENGLISH
- 11
“ ”= reverse (if present)
This appears on the display when selecting
the button “ ” and a reverse operation is
performed; when the button is released the
pictogram disappears.
“ ” = Aspirator operating
This appears on the display when selecting
the button “ ” indicating that the aspirator
is operating; when repressing the button “
” to stop operation, the pictogram will
flash for a few seconds and disappears when
the aspirator stops.
“ ”= Silent operation
Vacuum in operation.
This appears on the display when selecting
the button “ ” indicating that the aspirator
is operating at a reduced speed; when re-
pressing the button “ ” to return to normal
operation the pictogram disappears.
“ ” = Water dispensing presetting
This appears on the display when selecting
the button “
” indicating that the water
dispensing solenoid valve is enabled; when
repressing the button “
” solenoid valve
operation is disabled and the pictogram dis-
appears.
“ ”= Brush rotation presetting
This appears on the display when selecting
the button “
” indicating that brush rotation
is enabled; when repressing the button “
” brush rotation motor operation is disabled
and the pictogram disappears.
“ ” = Maximum fluid level in the tank
This displays when the fluid in the recovery
tank has reached hte maximum level.
9.1 FILLING THE TANK
(Fig. 11
)
WARNING:
Only add clean mains water to the tank at
a temperature no greater than 50°C.
- Remove the hose (26) supplied, connect
one end (26a) to a tap and insert the oth-
er end (26b) in the tank (5).
- Check that the tap (53) is open.
- Turn on the tap and fill the tank (5).
- The level of water contained in the tank is
displayed on the transparent tube (15).
- Pour the detergent fluid in the tank.
NOTE:
Use non-foamy detergents only. For the
quantities, follow the instructions provided by
the detergent manufacturer according to the
type of dirt.
DANGER:
If the detergent comes in contact with the
eyes and/or skin or if swallowed, refer to
the use and safety information booklet
provided by the manufacturer of the de-
tergent.
10.1 OPERATION (Fig. 1)
10.1.a - Checks before use
- Check that the exhaust tube (12) of the
recovery tank is properly coupled and
properly sealed.
- Check that the connector (54) on the
squeegee (11) is not blocked and that the
hose is connected correctly.
- Check that the clean water exhaust tube
(15) is correctly coupled to the supports
and that the tap (53) is open.
- Press the button (45) and check the bat-
tery charge state on the display.
Manuale FRECCIA RAPID 30 Touch_49026100_2ed_07-2018.indd 11 23/07/18 16:24