10
is correctly fitted into
the hub seat.
Fit the dashboard
cover (4) clicking the
seven fasteners into
place.
Fit the steering wheel
(5) onto the hub (1)
with the spokes di-
rected towards the
seat.
Fit the spacer (6) and
fasten the steering wheel in place using the screws supplied (7),
in the indicated order.
Fit the steering wheel cover (8) clicking the three fasteners into
place.
3.3 FITTING
THE SEAT
Mount the seat (1) on
the plate (2) using the
screws (3).
3.4 ASSEMBLY AND CONNECTING THE BATTERY
The battery (1) is housed under the seat and secured by a spring
(2).
First connect the red wire (3) to the positive pole (+) and then the
black wire (4) to the negative pole (–), using the screws supplied
as shown.
Apply silicone grease to the terminals and check that the protec-
tive cap for the red wire (8) is in place.
Always fully charge the battery according
to the instructions in the battery’s manual (
6.2.3).
To prevent the safety device in the elec-
tronic circuit board from cutting in, never start the engine until
the battery is fully charged!
Do not use the machine without the
guard (2) or with the battery incorrectly fixed in its
housing.
WARNING!
IMPORTANT
IMPORTANT
EN
1
2
3
4
5
5
1
6
7
8
2
3
3
1
Summary of Contents for MP 84C
Page 187: ......
